Posted by Mark
Amplifier Section
8-ohm FTC rated power/ch 125 W
4-ohm FTC rated power/ch 140 W
2-ohm dynamic power/ch 145 W
4/8-ohm FTC rated THD 0.1 %
Rated full power bandwidth 20-20kHz
S/N-IHF A-Weighted,dB 90
Slew Rate 180
Dimensions (HxWxD inches) 19×5.5×18
Comments Stereo receiver. Anthracite finish.
Tuner Section
IHF Sensitivity mono/stereo,dBf 10.3/-
Capture ratio,dB 1.5
AM Suppression,dB 62
Alt. ch. sensitivity,dB 72
Seperation at 1kHz,dB 46
THD at 1kHz,stereo 0.09 %
Maximum S/N,stereo,dB 78
Station presets 12
PreAmp Section
Frequency response 20-20kHz +- 1dB
Total Harmonic Distortion See amp section
S/N-IHF A-Weighted See amp section
Phono sensitivity for 0.5V@1kHz 1.5
MM Phono Overload mV 100
Phono input capacitance pF 150
MM S/N A-weighted 0.5v ref. 78
Tone Controls 3-band
Inputs 2 video/5 audio
Comments Sonic Holography
Remote control a/V receiver with sonic holography and ACCD. Silver seven transfer function modified. Carver magnetic field power section produces 125 watts per channel minimum output, both channels driven into 8 ohms from 20-20 KHZ with no more than 0.1% THD. 7 segment LED power meters. 2 video inputs W/dubbing & video monitor output. 7 audio inputs. 6 AM + 6 FM presets W/backup. Asymmetrical charge – coupled FM detection circuit. Preset scan and auto/Manual tuning. Sonic hologram generator. 3 band tone controls. Dual tape monitors W/dubbing. Loudness EQ & muting. A/B/A + B speakers selection & headphone output. 26 key remote is compatible W/Carver CD players.

[phpbay keywords=”carver 6250″ num=”12″ siteid=”1″ category=”293″ exclude=”manual,ad,review” sortorder=”EndTimeSoonest” templatename=”default”]

Comments on '6250' (2)

  1. Joden Dave D. Valdez says:

    May i request the schematic diagram of this model CARVER 6250. Can you e-mail it to me thanks godbless!

  2. Leon says:

    How can I purchase this receiver

Leave a Reply

Your email address will not be published. Required fields are marked *