Carver PSD-36b
Decoding system 1 bit conv
Output filtration
Frequency Response 5 Hz – 20kHz +-0.5dB
S/N-IHF A-weighted 90dB
Total Harmonic Distortion 0.01%
Disc capacity 10
Programmable selections
Dimensions (HxWxD,inches) 4.38 x 19 x 13.25
Comments
 
Architect's and Engineer's Specifications The compact disc changer shall be a front-loading magazine type with a capacity of 10 discs. The changer shall employ a 3-beam laser pickup and 1-bit digital to analog conversion. All functions except Eject shall be operable from the front panel and from an included wireless infra-red remote control transmitter. The changer shall be capable of 3 inch diameter compact discs by the installation of optional inserts in the magazine. The CD changer shall incorporate Carver Soft EQ circuitry for equalization and enhancement of stereo separation. The following controls for basic operation shall be included on the front panel: Power On/Off, Eject, Play/Pause, Stop/Clear, Forward Skip, Reverse, Forward Search, Reverse Search, Disc selector (10 key). The following additional features shall be included: Repeat mode, Random play, Intro scan, Time edit and Random programming with a capacity of 32 selections. Indication of disc number, track numbers and time information shall be provided by a vacuum florescent display. A headphone jack and headphone volume control shall be provided on the front panel. Frequency response shall be 5Hz – 20kHz ±0.5dB. S/N ratio (A Weighted) shall be 90dB. Output level shall be 1.8V RMS ±1.5dB at maximum recorded level. Total harmonic distortion shall be 0.01% or less. Channel separation shall be 85dB at 1kHz. Output impedance shall be approximately 1000? and recommended load impedance shall be 2.5? or greater. Dimensions of the unit shall be: height 4.38" (111 mm), width 19" (483 mm), depth of chassis 13.25" (337 mm), and overall depth 14.75" (375 mm). The unit shall be capable of mounted in a standard EIA rack without modification to the front panel.
Sponsors