Posted by Mark
Carver TFM-4.0

8-ohm FTC rated power/ch 375 W
4-ohm FTC rated power/ch 500 W
2-ohm dynamic power/ch 560 W
Bridged mono power 1000 W
4/8-ohm FTC rated THD 0.5 %
Rated full power bandwidth 20-20kHz
S/N-IHF A-Weighted,dB 110
Slew Rate 180
Dimensions (HxWxD inches) 3.5x19x10.5
Comments Stereo
Transfer function modified magnetic field power amplifier. Silver seven transfer function modified. 140 watts are ms/channel into 8 ohms, 20-20 KHZ with no more than 0.1% THD. 220 W/RMS/CH. Into 4 ohms, 20-20 KHZ with no more than 0.1% THD. Overload/clipping LED’s. Closed loop frequency response from under 10 HZ too above 100 KHZ.

[phpbay keywords=”carver tfm-4.0″ num=”12″ siteid=”1″ category=”293″ exclude=”manual” sortorder=”EndTimeSoonest” templatename=”default”]

Comments on 'TFM-4.0' (1)

  1. zumbini says:

    The amplifier listed as a TFM-4.0 appears to be an M-4.0t. (For a better picture google “Carver m-4.0” or check ebay.)

    Also, the 140 watt per channel power rating in the description is incorrect. The ratings listed above the description are correct.

Leave a Reply

Your email address will not be published. Required fields are marked *