Posted by Mark
8-ohm FTC rated power/ch 225 W
4-ohm FTC rated power/ch 350 W
2-ohm dynamic power/ch 750 W
Bridged mono power 600 W
4/8-ohm FTC rated THD 0.15 %
Rated full power bandwidth 20-20kHz
S/N-IHF A-Weighted,dB 110
Slew Rate 180
Dimensions (HxWxD inches) 3.5x19x10.5
Comments Stereo
Simultaneous High Current / High Voltage Magnetic Field Power Amplifier. Eminently affordable and yet astonishingly powerful, the TFM – 22 and TFM – 25 are designed to drive many popular speaker designs whose overall impedance fluctuations can tax conventional amp designs. Silver seven transfer function modified. 225 W RMS/channel into 8 ohms, 20-20 KHZ with no more than 0.5% THD. 350 what’s RMS/channel into 4 ohms, 20-20 KHZ with no more than 0.5% THD. 600 watts bridged mono. TFM – 22 employs LED power overload/clipping indicators.

[phpbay keywords=”carver tfm-22″ num=”12″ siteid=”1″ category=”293″ exclude=”manual” sortorder=”EndTimeSoonest” templatename=”default”]

Comments on 'TFM-22' (3)

  1. P HORNE says:


  2. John says:

    Most of the info would be the same as that described in the well written article except it didn’t mention that these amps are bridgeable for mono output 🙂

    Anyway; since you’re amp is part of the transfer modified line > TFM. All that would be different is the wattage per channel for your model, based on whether you use 8ohm or 4ohm speakers.

  3. jerry c walton says:

    i have 2 of these i will sell if someone is interested. they are both in very good shape, 6 vyears ago when i bought them, they were rebuilt

Leave a Reply

Your email address will not be published. Required fields are marked *