Carver Sound and Audio
Carver Amplifier and Carver Audio Product Specs and Information
Carver Silver-9t |
|
|
|
| 8-ohm FTC rated power/ch | 550 W |
| 4-ohm FTC rated power/ch | 900 W |
| 2-ohm dynamic power/ch | 1000 W |
| Center Channel Power | |
| Rear Channel Power | |
| Bridged mono power | - |
| Parallel mono power | |
| 4/8-ohm FTC rated THD | 0.5% |
| IM Distortion | |
| CMRR | |
| Input Impedance (Line) | |
| Input Sensitivity | |
| Gain | |
| Rated full power bandwidth | 20-20kHz |
| S/N-IHF A-Weighted,dB | >100 |
| Slew Rate | - |
| Power Consumption | |
| Fusing | |
| Dynamic Headroom | |
| Damping | |
| Dimensions (HxWxD inches) | 6.3x11x15.5 |
| Comments | Mono - 2 required for stereo |
| Simultaneous High Current/High Voltage Monoblock Reference Magnetic Field Power Amplifier. Our finest solid-state amplifier. Sets new standards for sonic quality and robust output at any impedance. Transfer Function Modified to provide the warm, natural sound of a tube amplifier. 550 watts into 8 ohms. 900 watts into 4 ohms. 1000 watts into 2 ohms. Lighted analog power meter. Shock-isolation mounting. 2 required for stereo. Capable of high output into very low impedance loads for sustained periods—useful when trying to drive many "esoteric" loudspeakers. Patented Magnetic Field Power Supply provides extraordinary power from a compact design. Special circuitry to protect both the amplifier and loudspeakers from overload. | |
Sponsors