Carver Sound and Audio
Carver Amplifier and Carver Audio Product Specs and Information
Carver CM-1090 |
|
|
|
| 8-ohm FTC rated power/ch | 100 W |
| 4-ohm FTC rated power/ch | 150 W |
| 2-ohm dynamic power/ch | 80 W |
| Center Channel Power | |
| Rear Channel Power | |
| Bridged mono power | - |
| Parallel mono power | |
| 4/8-ohm FTC rated THD | 0.5 % |
| IM Distortion | |
| CMRR | |
| Input Impedance (Line) | |
| Input Sensitivity | |
| Gain | |
| Rated full power bandwidth | 20-20kHz |
| S/N-IHF A-Weighted,dB | 85 |
| Slew Rate | 180 |
| Power Consumption | |
| Fusing | |
| Dynamic Headroom | |
| Damping | |
| Dimensions (HxWxD inches) | 4.5x19x13w |
| Comments | Integrated stereo amplifier |
| Remote control sonic holography integrated amplifier with transfer function modified power section. Silver seven transfer function modified. 100 watts/channel RMS into 8 ohms, 20-20 KHZ with no more than 0.1% THD. Analog power meters. Five audio inputs. Motorized volume control. 3 - band tone controls. Dual tape monitors with dubbing. Pre/main outputs. Remote compatible with Carver tuners and CD players. | |
Sponsors