| Amplifier Section |
| 8-ohm FTC rated power/ch |
60 W |
| 4-ohm FTC rated power/ch |
90 W |
| 2-ohm dynamic power/ch |
80 W |
| 4/8-ohm FTC rated THD |
0.5 % |
| Rated full power bandwidth |
20-20kHz |
| S/N-IHF A-Weighted,dB |
85 |
| Slew Rate |
180 |
| Dimensions (HxWxD inches) |
4.5x19x14.5 |
| Comments |
Stereo receiver |
Tuner Section |
| IHF Sensitivity mono/stereo,dBf |
12.3/- |
| Capture ratio,dB |
3.0 |
| AM Suppression,dB |
62 |
| Alt. ch. sensitivity,dB |
72 |
| Seperation at 1kHz,dB |
46 |
| THD at 1kHz,stereo |
0.15 % |
| Maximum S/N,stereo,dB |
78 |
| Station presets |
20 |
PreAmp Section |
| Frequency response |
20-20kHz +- 1dB |
| Total Harmonic Distortion |
See amp section |
| S/N-IHF A-Weighted |
See amp section |
| Phono sensitivity for 0.5V@1kHz |
1.5 |
| MM Phono Overload mV |
100 |
| Phono input capacitance pF |
150 |
| MM S/N A-weighted 0.5v ref. |
78 |
| Tone Controls |
3-band |
| Inputs |
5 audio |
| Comments |
Sonic Holography |
| |
| Remote control sonic holography/ACCD receiver. Silver seven transfer function modified. 60 watts/channel RMS into 8 ohms, 20-20 KHZ with no more than 0.1% THD. 5 audio inputs. Sonic hologram generator. Asymmetrical charged - coupled FM detection circuit. 20 FM/AM presets. Preset scan and auto/Manual tuning. Motorized volume control. 3 band tone controls. Matrix surround sound synthesizer. Dual tape monitors W/dubbing. Remote compatible with Carver compact disc players. |
| |
|
Carver HR-722 Owners Manual
Carver HR-722 Service Manual
US $125.00
I have a Carver HR-722 receiver. Sound is good and it drives the speakers well. The problem I am having is that the receiver only drives the LH speakers when ‘CD Direct’ is engaged. Other than that, only the RH speakers are operational.
I know the LH speakers work because the system runs all 4 speakers when its on ‘CD Direct’. This is a GREAT system when its on’CD Direct’, but my kids want to play Video games, watch movies and plug their IPods into the receiver.
Please advise any possible solutions. Thanks -
HBM