|8-ohm FTC rated power/ch||100W|
|4-ohm FTC rated power/ch||150W|
|2-ohm dynamic power/ch||200W|
|Center Channel Power||110W|
|Rear Channel Power||50W|
|4/8-ohm FTC rated THD||0.1%|
|Input Impedance (Line)||47 kohms|
|Rated full power bandwidth||20-22kHz|
|Dimensions (HxWxD inches)||4.4x19x15|
|Removable rack handles for 17" width. 5 channel amplifier for Dolby Pro Logic systems. Exclusive Power Enhancement CircuitTM for surround channels. Includes special protection circuits.|
The AV-405 five channel power amplifier was designed specifically for use in home theater surround sound systems. When teamed with one of Carver's superb Dolby Pro Logic components (preamplifier, preamp/tuner, or outboard processor), the AV-405 provides power, flexibility far surpassing any single-unit receiver, yet does so at a comparable cost.
With 410 watts of total output (8Ω loads), the AV-405 has ample power reserves for accurately reproducing peaks on digital soundtracks, even when driving low impedance loads. Elevated power output for the center channel, an exclusive Carver feature, provides better handling of dynamic peaks on the dialog tracks as well as more balanced, realistic soundtrack reproduction.
The AV-405 shuns production shortcuts common in low-cost surround sound receivers. It employs all discrete circuitry in the output stage for greater long-term reliability and superior response to peak demands for simultaneous high current and high voltage. Robust power supplies ensure that all five channels can be driven to full power simultaneously – not always the case with receivers! In addition, the AV-405 incorporates Power Enhancement CircuitryTM, an exclusive Carver feature which allows higher undistorted volume levels on the rear surround channels.
If you're ready to step up to the advantage of Home Theater separates, the AV-405 provides five channels of Carver power in one convenient package.
|Carver AV 405 5 Channel Amplifier|
Time Remaining: 1d 10h 4m
Buy It Now for only: $300.00