8-ohm FTC rated power/ch	380 W
4-ohm FTC rated power/ch	600 W
2-ohm dynamic power/ch	1150 W
Bridged mono power	1200 W into 8 ohms
4/8-ohm FTC rated THD	less than 0.08%
Input Impedance (Line)	47 kohms
Gain	29.0 dB (+/- 0.5dB)
Rated full power bandwidth	20-20kHz
Dynamic Headroom	>1.0dB @ 8 ohms all channels driven
Damping	>150 typical (20Hz - 20 kHz)
In setting out to design the A-760x Carver's engineering team drew on lessons learned in the design and building of the acclaimed Lightstar Reference amplifier, a development hailed recently in "Fi" magazine as "evidence that Carver Corporation has made a strong commitment to first-rate build quality as well as to engineering innovation." The A-760x uses Carver's newest power amplification technology "Magnified Current". This technology enables the A-760x to provide either twice the continuous voltage or twice the continuous current needed by the loudspeaker load at any given time. With more than enough current and voltage-peak or continuous- the Lightstar-inspired A-760x is the ultimate consumer amplifier on the market today.

• Certified by Lucasfilm, Ltd. for use in home THX audio systems
• Magnified Current technology for increasing voltage and current capability
• Total Direct Coupling for high damping factor at all frequencies
• Each channel protected by: individual fusing, excess temperature sense, DC fault sense, power-on delay, shorted load sense.
• Minimal signal path design, with on card I/O connectors eliminating internal interconnect cables
• Gold Plated RCA Jack Connections
• Dual analog lighted meters with range selection switch
• Meter light On/Off switch
• Individual calibrated level trim controls for each channel
• Removable handles for 17" cabinet space (with trim caps)
• Designed and built by Carver Corporation in Lynnwood, WA USA

Carver A-760X Service Manual