 | |
| 8-ohm FTC rated power/ch | 380 W |
| 4-ohm FTC rated power/ch | 600 W |
| 2-ohm dynamic power/ch | 1150 W |
| Bridged mono power | 1200 W into 8 ohms |
| 4/8-ohm FTC rated THD | less than 0.08% |
| Input Impedance (Line) | 47 kohms |
| Gain | 29.0 dB (+/- 0.5dB) |
| Rated full power bandwidth | 20-20kHz |
| Dynamic Headroom | >1.0dB @ 8 ohms all channels driven |
| Damping | >150 typical (20Hz - 20 kHz) |
| In setting out to design the A-760x Carver's engineering team drew on lessons learned in the design and building of the acclaimed Lightstar Reference amplifier, a development hailed recently in "Fi" magazine as "evidence that Carver Corporation has made a strong commitment to first-rate build quality as well as to engineering innovation." The A-760x uses Carver's newest power amplification technology "Magnified Current". This technology enables the A-760x to provide either twice the continuous voltage or twice the continuous current needed by the loudspeaker load at any given time. With more than enough current and voltage-peak or continuous- the Lightstar-inspired A-760x is the ultimate consumer amplifier on the market today. | |
- Certified by Lucasfilm, Ltd. for use in home THX audio systems
- Magnified Current technology for increasing voltage and current capability
- Total Direct Coupling for high damping factor at all frequencies
- Each channel protected by: individual fusing, excess temperature sense, DC fault sense, power-on delay, shorted load sense.
- Minimal signal path design, with on card I/O connectors eliminating internal interconnect cables
- Gold Plated RCA Jack Connections
- Dual analog lighted meters with range selection switch
- Meter light On/Off switch
- Individual calibrated level trim controls for each channel
- Removable handles for 17" cabinet space (with trim caps)
- Designed and built by Carver Corporation in Lynnwood, WA USA
I would like to purchase this amp….can anyone help me?